A:link,A:visited {text-decoration:none}
A:hover {text-decoration:underline}
A:hover {color: #800000}
body{scrollbar-face-color : #000000 ;
scrollbar-shadow-color : #339966 ;
scrollbar-highlight-color : #000000 ;
scrollbar-3dlight-color : #339966 ;
scrollbar-darkshadow-color : #000000 ;
scrollbar-track-color : #599d03 ;
scrollbar-arrow-color : #ffffff;}
Department: Gate Openers Line: Gate Openers Family: Kits and motors for wing gates
Complete Kit for wing gates up to 2,00 + 2,00 m - 24VdcPICO KIT/H2 F 03.H2 FComposed of: MT/C2 two 24 Vdc irreversible motors with adjustable internal mechanical retainers; CR/39 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/24 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10/12 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 2,00 m - 24VdcMT/C2 03.C224Vdc irreversible-type motor. Easily adjustable internal mechanical retainers. Strong steel frame with external ABS protection without edges. Practical release by the rotation of the relevant lever protected by lock. Fixing brackets for easy motor installation. Planetary reduction system without any maintenance.
Details
Complete Kit for wing gates up to 2,00 + 2,00 m.KIT/39 F 02.39 FComposed of: MT/38/1 two 230 Vac irreversible motors with aluminium protection fairing; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 2,00 mMT/38/1 03.38/1230Vac irreversible-type motor. Anodised aluminium protection fairing for long duration through time. Practical release by the rotation of the relevant lever protected by lock. Circuit breaker protection incorporated. Fixing brackets for easy motor installation. Reducer sealed in permanent semi-fluid grease for a total absence of maintenance.
Details
Complete Kit for wing gates up to 3,00 + 3,00 m.KIT/F3F 03.F3FComposed of: MT/B3 two 230 Vac irreversible motors with adjustable internal mechanical limit switches; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/64 two 4-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 3,00 mMT/B3 03.B3230Vac irreversible motor with adjustable internal mechanical retainers. Housing protected by lock for: - release with safety handle key - terminal board for connections - condenser. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Circuit breaker protection incorporated. Electric limit switch on request. Multi-aperture fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Complete Kit for wing gates up to 3,00 + 3,00 m - 24Vdc.KIT/H3 F 03.H3FComposed of: MT/C3 two 24 Vdc irreversible motors with adjustable internal mechanical retainers; CR/39 control unit with incorporated radio receiver and removable terminal boards; OG/64 two 4-channel remote control with battery charge control and pouch; RZ/24 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10/12 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 3,00 m - 24VdcMT/C3 03.C324Vdc irreversible motor with adjustable internal mechanical retainers. Housing protected by lock for: - release with safety handle key - terminal board for connections. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Electric limit switch on request. Multi-aperture fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Complete Kit for wing gates up to 3,00 + 3,00 m.KIT/30 F 03.32 FComposed of: MT/30/2 two 230 Vac irreversible motors with aluminium protection fairing; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 3,00 m.MT/30/2 03.30/2230Vac irreversible-type motor. Anodised aluminium protection fairing for long duration through time. Underlying protection of worm screws from sprays of dust, which can be violent. Practical release by the rotation of the relevant lever protected by lock. Circuit breaker protection incorporated. Fixing brackets for easy motor installation. Reducer sealed in permanent semi-fluid grease for a total absence of maintenance.
Details
Reversing motor for wing gates up to 2,50 m.MT/37/1 03.37/1230Vac reversible-type motor. Anodised aluminium protection fairing for long duration through time. Underlying protection of worm screws from sprays of dust, which can be violent. Practical release by the rotation of the relevant lever protected by lock. Circuit breaker protection incorporated. Fixing brackets for easy motor installation. Reducer sealed in permanent semi-fluid grease for a total absence of maintenance.
Details
Complete Kit for wing gates up to 4,00 + 4,00 m.KIT/F4F 03.F4 FComposed of: MT/B4 two 230Vac irreversible motors with adjustable internal mechanical limit switches; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 4,00 m.MT/B4 03.B4230Vac Irreversible motor with adjustable internal mechanical retainers. Housing protected by lock for: - release with safety handle key - terminal board for connections - condenser. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Circuit breaker protection incorporated. Electric limit switch on request. Multi-aperture fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Complete Kit for wing gates up to 4,00 + 4,00 m - 24Vdc.KIT/H4 F 03.H4 FComposed of: MT/C4 two 24 Vdc irreversible motors with adjustable internal mechanical retainers; CR/39 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/24 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10/12 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Motor for wing gates up to 4,00 m - 24VdcMT/C4 03.C424Vdc irreversible motor with adjustable internal mechanical retainers. Housing protected by lock for: - release with safety handle key - terminal board for connections. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Electric limit switch on request. Multi-aperture fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Complete Kit for wing gates up to 4,00 + 4,00 m.KIT/08 F 14.28 FComposed of: MT/92 230 Vac right irreversible motor with electro-mechanical disengager; MT/93 230 Vac left irreversible motor with electro-mechanical disengager; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 2 strong pairs of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Right motor for wing gates up to 4,00 m.MT/92 13.92Self-locking electromechanical right motor MT/92 for wing gates up to 4,00 m. Max. weight of the wing: 300 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. thrust: 2500N. Max. torque: 400Nm. Opening time: 30 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 120x180x1090mm. Weight: 15 Kg. With fixing brackets.
Details
Left motor for wing gates up to 4,00 m.MT/93 13.93Self-locking electromechanical left motor MT/93 for wing gates up to 4,00 m. Max. weight of the wing: 300 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. thrust: 2500N. Max. torque: 400Nm. Opening time: 30 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 120x180x1090mm. Weight: 15 Kg. With fixing brackets.
Details
Motor for wing gates up to 6,00 m - 230Vac.MT/B6 03.B6230Vac Irreversible motor with adjustable internal mechanical retainers. Housing protected for: - release with safety handle key - terminal board for connections - condenser. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Circuit breaker protection incorporated. Electric limit switch on request. Fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Motor for wing gates up to 6,00 m - 24Vdc.MT/C6 03.C624Vdc Irreversible motor with adjustable internal mechanical retainers. Housing protected for: - release with safety handle key - terminal board for connections. Strong steel frame with external ABS protection without edges. Underlying protection of worm screws from sprays of dust, which can be violent. Electric limit switch on request. Fixing brackets for easy motor installation. Reducer sealed in semi-fluid grease without any maintenance.
Details
Right motor for wing gates up to 6,00 m.MT/88 14.88Self-locking electromechanical right motor MT/88 for sliding gates up to 6,0 m. Max. weight of the wing: 500 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. thrust: 2500N. Max. torque: 550Nm. Opening time: 52 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 120x180x1500mm. Weight: 17 Kg. With fixing brackets.
Details
Left motor for wing gates up to 6,00 m.MT/89 14.89Self-locking electromechanical left motor MT/89, for sliding gates up to 6,0 m. Max. weight of the wing: 500 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. thrust: 2500N. Max. torque: 550Nm. Opening time: 52 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 120x180x1500mm. Weight: 17 Kg. With fixing brackets.
Details
Kit for the unlocking from outsideM/52 14.52Kit for the unlocking from outside for the motors MT/92-93-88-89
Details
Flushmounting case for the Kit M/52M/54 14.54Flushmounting case for the Kit M/52
Details
Kit with articulated-arm motors for swing gates up to 3,5+3,5mKIT/76 F 03.75 FComposed of: MT/76D 230 Vac right irreversible motors with adjustable internal electro-mechanical limit switches; MT/76S 230 Vac left irreversible motors with adjustable internal electro-mechanical limit switches; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Right motor with articulated arm - 230 VacMT/76 D 03.76 DElectromechanical, self-locking motor for wing gates up to 3,5m. Max weight of 1 wing: 250Kg. Power supply: 230V~±10%50/60Hz. Power and absorption: 190W-1,3A. Max torque: 380Nm. Opening time: 13 sec for 90°. Working temperature: -25°÷+70°C.
Details
www.ArmaSystem.com
Left motor with articulated arm - 230 VacMT/76 S 03.76 SElectromechanical, self-locking motor for wing gates up to 3,5m. Max weight of 1 wing: 250Kg. Power supply: 230V~±10%50/60Hz. Power and absorption: 190W-1,3A. Max torque: 380Nm. Opening time: 13 sec for 90°. Working temperature: -25°÷+70°C.
Details
Right motor with articulated arm - 24VdcMT/76/24 D 03.76/24 DElectromechanical, self-locking motor for wing gates up to 3,5m. Max weight of 1 wing: 250Kg. Power supply: 230V~±10%50/60Hz. Power and absorption: 190W-1,3A. Max torque: 380Nm. Opening time: 13 sec for 90°. Working temperature: -25°÷+70°C.
Details
Left motor with articulated arm - 24VdcMT/76/24 S 03.76/24 SElectromechanical, self-locking motor for wing gates up to 3,5m. Max weight of 1 wing: 250Kg. Power supply: 230V~±10%50/60Hz. Power and absorption: 190W-1,3A. Max torque: 380Nm. Opening time: 13 sec for 90°. Working temperature: -25°÷+70°C.
Details
Underground Kit for wing gates up to 2,20 + 2,20 m.KIT UNICO F 02.72 FComplete underground Kit for wing gates up to 2,20+2,20 m. It consists of: 2 motors MT/72 with foundation box, microprocessor control panel CR/30 with two-channel card receiver SOG/4; two-channel self-learning transmitter OG/52; flashing light with built-in antenna RZ/07F+bracket RZ/99; electric key M/10; pair of photocells P/10; electric lock M/83/1.
Details
Underground motor for wing gates up to 2,20 m.MT/72 03.72Underground electromechanical reversing motor for a wing up to 2,20 m. Thanks to its foundation box made in polypropylene there is no need to prepare any water pipe. Max. weight of the wing: 250 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. torque: 175Nm. Opening time: 20 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 302x154x170mm. Weight: 11,7 Kg.
Details
Foundation box for the motor MT/72-MT/71CF/77 03.77Foundation box for the motor MT/72-MT/71 in polypropylene that does not require any water pipe.
Details
Long telescopic armKB/72 93.97
Details
Underground Kit 24V, self-locking for swing gates up to 2,20+2,20 m.KIT UNICO/24 F 02.71 FKit composed of: 2 Motors MT/71 with foundation box, microprocessor control panel CR/39 with incorporated receiver; two-channel mini-transmitter OG/52; flashing light RZ/24F with incorporated antenna + bracket RZ/99; electric key M/10; 1 pair of photocells P/10/12: inside unlocking device K/71 I
Details
Underground 24V- motor for wing gates up to 2,20 m.MT/71 03.71Underground electromechanical reversing 24V- motor for a wing up to 2,20 m. Thanks to its foundation box made in polypropylene there is no need to prepare any water pipe. Max. weight of the wing: 250 Kg. Power supply: 24V- ±25%. Max. torque: 175Nm. Opening time: 13 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 154x302x170mm. Weight: 10,7 Kg.
Details
Inside unlocking system for MT/71K/71 I 24.71 I
Details
Outside unlocking system for MT/71K/71 E 24.71 E
Details
Underground side motor for wing gates up to 2,50 m.MT/73/1 03.73/1Underground self-locking electromechanical side motor for a wing up to 2,50 m. With foundation box. Max. weight of the wing: 400 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. torque: 350Nm. Opening time: 20 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 380x270x140mm. Weight: 27 Kg.
Details
Underground Kit for wing gates up to 3,00 m.KIT/2A F 02.2A FComposed of: MT/2A irreversible aluminium 230 Vac motor; CF/2A support foundation box; CR/41 control unit with incorporated radio receiver and removable terminal boards; OG/62 two 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 2 strong pairs of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Central underground motor for wing up to 3,00 mMT/2A 03.2ACentral underground electromechanical motor for wing up to 3,00 meters. Max wing weight 250Kg. Power supply 230V~±10% 50/60Hz. Max torque on the wing 375Nm. Opening time: 18 sec for 90°. Max opening angle 110°. Working temperature: -25÷+70°C. IP-Grade IP/67. Dimensions: 380x230x170mm. Weight: 10Kg
Details
Foundation box for MT/2A with unlocking deviceCF/2A 03.CFSteel foundation box for MT/2A with unlocking device with lever, for an easy opening in case of network failure.
Details
Foundation box for MT/2A with limit switchesCF/2B 03.BFSteel foundation box for MT/2A with mechanical limit switches to guarantee a precise and safe stop. Unlocking device with lever in case of power supply failure.
Details
Complete underground Kit for wing gates up to 3,50 m.KIT/86 F 03.86 FComplete underground Kit for a wing up to 3,50 m. It consists of: motor MT/80/2 with foundation box, microprocessor control panel CR/31 with two-channel card receiver SOG/4; 2 two-channel self-learning transmitters OG/52; flashing light with built-in antenna RZ/07/1F + bracket RZ/99; electric key M/10; 2 pairs of photocells P/10.
Details
Underground central motor for wing gates up to 3,50 m.MT/80/2 03.80/2Underground self-locking electromechanical central motor for a wing up to 3,50 m. With foundation box. Max. weight of the wing: 500 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. torque: 375Nm. Opening time: 23 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 395x335x176mm. Weight: 33,5 Kg.
Details
Underground motor for wing gates up to 3,50 m. without foundation boxMT/82/2 03.82/2Underground self-locking electromechanical central motor for a wing up to 3,50 m. Without foundation box. Max. weight of the wing: 500 Kg. Power supply: 230V~ ±10% 50/60 Hz. Max. torque: 375Nm. Opening time: 23 sec for 90°. Temperature: -20 ÷ +60°C. Dimensions: 395x335x176mm. Weight: 33,5 Kg.
Details
Foundation boxCF/81/2 03.81/2Strong foundation box in galvanized steel with bottom cover 4mm. For the motor MT/80/2. Unlocking system with security key.
Details
Chain wheel gear for the motor MT/80/2KIT/83/1 03.83/1Chain wheel gear for the motor MT/80/2 to open up to 180°
Details
Complete Kit for sliding gates up to 200 KgKIT IUNIOR 200 F 24.99 FComposed of: MT/200 230 Vac motor complete with base plate and limit switch slide plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/28 2-channel remote control; RZ/10 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use.
Details
Complete Kit for sliding gates up to 300 KgKIT MERCURIO 302 F 29.75 FComposed of: MT/302 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Basic Kit for sliding gates up to 300 KgMERCURIO 302H 29.74Composed of: MT/302 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/28 2-channel remote control.
Details
Motor for sliding gates up to 300 KgMT/302 29.73Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42.
Details
Complete Kit for sliding gates up to 500 KgKIT MERCURIO 501F 24.79 FComposed of: MT/501 speed 6 metres per minute 230Vac motor with encoder, complete with base plate and side plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Complete Kit for sliding gates up to 500 KgKIT MERCURIO 502 F 24.29 FComposed of: MT/502 speed 10 metres per minute 230Vac motors with encoder, complete with base plate and side plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Basic Kit for sliding gates up to 500 KgMERCURIO 501H 24.78Composed of: MT/501 speed 6 metres per minute 230Vac motor with encoder, complete with base plate and side plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/28 2-channel remote control.
Details
Basic Kit for sliding gates up to 500 KgMERCURIO 502H 24.28Composed of: MT/502 speed 10 metres per minute 230Vac motor with encoder, complete with base plate and side plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; OG/28 2-channel remote control.
Details
Motor for sliding gates up to 500 KgMT/501 24.77Speed 6 metres per minute. 230 VAC irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42.
Details
Motor for sliding gates up to 500 KgMT/502 24.27Speed 10 metres per minute. 230 VAC irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42.
Details
Complete Kit for sliding gates up to 500 Kg - 24VdcKIT MERCURIO 524 A F 24.85/24 A FComposed of: MT/524 A 24Vdc motor with encoder, complete with base plate and limit switch slide plate; CR/42/24 control unit with incorporated radio receiver and removable terminal boards; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/24 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Basic Kit for sliding gates up to 500 Kg - 24VdcMERCURIO 524 A H 24.84/24 AComposed of: MT/524 A 24Vdc motor with encoder, complete with base plate and limit switch slide plate; CR/42/24 control unit with incorporated radio receiver and removable terminal boards; OG/28 2-channel remote control.
Details
Motor for sliding gates up to 500 Kg - 24VdcMT/524 A 24.83/24 A24 Vdc Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42/24.
Details
Complete Kit for sliding gates up to 800 KgKIT MERCURIO 802 F 29.45 FComposed of: MT/802 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 control unit with incorporated radio receiver and removable terminal boards; MR/08 relay module for open gate indicator and 2nd start condenser; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/10 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Basic Kit for sliding gates up to 800 KgMERCURIO 802H 29.44Composed of: MT/802 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 control unit with radio receiver; MR/08 relay module; OG/28 2-channel remote control.
Details
Motor for sliding gates up to 800 KgMT/802 29.43230 Vac Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42.
Details
Complete Kit for sliding gates up to 900 KgKIT GRAN MERCURIO 900F 29.19FComposed of: GM/900 230 Vac motor with encoder, complete with base plate; CR/42 GM control unit with incorporated radio receiver and removable terminal boards; MR/08 relay module for open gate indicator and 2nd start condenser; OG/62 two 2-channel remote control with battery charge control and pouch; RF/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/94 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Complete Kit for sliding gates up to 1300 KgKIT GRAN MERCURIO 1300F 29.29FComposed of: GM/1300 230 Vac motor with encoder, complete with base plate; CR/42 GM control unit with incorporated radio receiver and removable terminal boards; MR/08 relay module for open gate indicator and 2nd start condenser; OG/62 two 2-channel remote control with battery charge control and pouch; RF/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/94 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Complete Kit for sliding gates up to 2000 KgKIT GRAN MERCURIO 2000F 29.39FComposed of: GM/2000 230 Vac motor with encoder, complete with base plate; CR/42 GM control unit with incorporated radio receiver and removable terminal boards; MR/08 relay module for open gate indicator and 2nd start condenser; OG/62 two 2-channel remote control with battery charge control and pouch; RF/20 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/94 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism.
Details
Basic Kit for sliding gates up to 900 KgGRAN MERCURIO 900H 29.18Composed of: GM/900 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 GM control unit with radio receiver; MR/08 relay module; OG/28 2-channel remote control.
Details
Basic Kit for sliding gates up to 1300 KgGRAN MERCURIO 1300H 29.28Composed of: GM/1300 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 GM control unit with radio receiver; MR/08 relay module; OG/28 2-channel remote control.
Details
Basic Kit for sliding gates up to 2000 KgGRAN MERCURIO 2000H 29.38Composed of: GM/2000 230 Vac motor with encoder, complete with base plate and limit switch slide plates; CR/42 GM control unit with radio receiver; MR/08 relay module; OG/28 2-channel remote control.
Details
Motor for sliding gates up to 900 KgGM/900 29.17230Vac Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42 GM.
Details
Motor for sliding gates up to 1300 KgGM/1300 29.27230Vac Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42 GM.
Details
Motor for sliding gates up to 2000 KgGM/2000 29.37230Vac Irreversible motor complete with limit switch slide plates. Base in pressure die-cast aluminium plus base plate with easy and quick installation. Allows the fine adjustment of the “rack and pinion” coupling. ABS container without edges. Safe, practical and quick release with hatch and safety key. Fairleads protection gasket for “electronic control unit/motor” zone. Prevents the passage of insects. Large internal space for easy wiring. Possibility of connecting the “encoder” unit -code SR 95.74- when it is connected to the electronic control unit CR/42 GM.
Details
Complete Kit for sliding gates up to 1800-2500 KgKIT/18 F 24.19 FComposed of: MT/18 230/400 Vac three-phase motor complete with limit switch slide plates; CR/14 control unit with removable terminal boards; SOG/4A dual-channel mono-bistable radio card with self-learning; OG/62 one 2-channel remote control with battery charge control and pouch; RZ/07/1 F flashing light with exclusive incorporated invisible antenna; RZ/99 flashing light support bracket for wall installation; P/94 a strong pair of photocells with modulated infra-red light for outdoor use; M/10 electric key in water-proof, shock-resistant container protected against vandalism; PM/13 steel foundation plate.
Details
Basic Kit for sliding gates up to 1800 KgKIT/18 H 24.20Composed of: MT/18 230/400 Vac three-phase motor complete with limit switch slide plates; CR/14 control unit fot three-fase motors; PM/13 steel foundation plate.
Details
Basic Kit for sliding gates up to 2500 KgKIT/25 H 24.24Composed of: MT/25 230/400 Vac three-phase motor complete with limit switch slide plates; CR/14 control unit fot three-fase motors; PM/13 steel foundation plate.
Details
Motor for sliding gates up to 1800 KgMT/18 24.18230/400 Vac three-phase irreversible motor complete with limit switch slide plates. Motor support in aluminium alloy. Motor force adjustment with mechanical friction. Solid ABS container without edges. Practical motor release key with safety key. Protection fairleads for the “electronic control unit zone. Prevents the passage of insects. Large internal space for easy wiring. ????
Details
Motor for sliding gates up to 2500 KgMT/25 24.23230/400 Vac three-phase irreversible motor complete with limit switch slide plates. Motor support in aluminium alloy. Grids for airing and electric fan for cooling controlled by thermal cut-out. Motor force adjustment with mechanical friction. Solid ABS container without edges. Practical motor release key with safety key. Protection fairleads for the “electronic control unit zone. Prevents the passage of insects. Large internal space for easy wiring. ????
Details
Motor for sliding gates up to 5000 KgMT/5000/1 24.50/1400Vac Three-phase + neutral irreversible motor complete with base plate and limit switch slide plates. Sheet steel container treated against corrosion. Self-ventilated for intensive service, reliable in the case of intense use. Motor force adjustment with mechanical friction. Electric brake to contain the gate stop run. Practical motor release lever with safety key. Steel pinion with notching module M6.
Details
Barrier complete with control unit - 24VdcSB/2/24 05.02/2424Vdc Barrier complete with control unit and irreversible motor complete with encoder and electronic slow-down. 3 mm sheet steel support structure treated against corrosion. External 0.8 mm column in painted sheet steel and plastic cover. Adjustable internal mechanical stops. Large internal space for easy wiring. Release with double key in the case of a power cut. Reducer sealed in semi-fluid grease without any maintenance.
Details
2 m. Arm for SB/2/24 BarrierSB/A2 05.12Anodised aluminium arm complete with rectangular reflector studied for the application of the M/66 sensitive edge -supplied separately- and lights A/02 -optional- see page 67. Dimensions 28.4x80 mm. Length 2 m. Weight 2.36 Kg.
Details
Barrier complete with control unit - 230VacSB/25/2 05.25/2230Vac Barrier complete with control unit and irreversible motor and mechanical slowing by rod-crank system. 2.5 mm sheet steel column treated against corrosion. Adjustable electro-mechanical limit switch. Internal balancing system with single spring. Large internal space for easy wiring. Release with double key in the case of a power cut. Circuit breaker protection incorporated. Reducer sealed in semi-fluid grease without any maintenance.
Details
2,5 m. Arm for SB/25/2 BarrierSB/A25 05.25 AAnodised aluminium arm complete with rectangular reflector studied for the application of the M/66 sensitive edge -supplied separately. Dimensions 45x120 mm. Length 2.5 m. Weight 4.8 Kg.
Details
Barrier complete with control unit - 24VdcSB/4/24 05.04/2424Vdc Barrier complete with control unit and irreversible motor complete with encoder and electronic slow-down. 3 mm sheet steel support structure treated against corrosion. External 0.8 mm column in painted sheet steel and plastic cover. Adjustable internal mechanical stops. Internal balancing system with single spring. Large internal space for easy wiring. Release with double key in the case of a power cut. Reducer sealed in semi-fluid grease without any maintenance.
Details
4 m. Arm for SB/4/24 BarrierSB/A4 05.14Anodised aluminium arm complete with rectangular reflector studied for the application of the M/66 sensitive edge -supplied separately- and lights LA/04 -optional. Dimensions 28.4x80 mm. Length 4 m. Weight 4.73 Kg.
Details
Barrier complete with control unit - 230VacSB/45/2 05.45/2230Vac Barrier complete with control unit and irreversible motor and mechanical slowing by rod-crank system. 2.5 mm sheet steel column treated against corrosion. Adjustable electro-mechanical limit switch. Internal balancing system with double spring. Large internal space for easy wiring. Release with double key in the case of a power cut. Circuit breaker protection incorporated. Reducer sealed in semi-fluid grease without any maintenance.
Details
4,5 m. Arm for SB/45/2 BarrierSB/A45 05.45 AAnodised aluminium arm complete with rectangular reflector studied for the application of the M/66 sensitive edge -supplied separately. Dimensions 45x120 mm. Length 4.5 m. Weight 8.6 Kg.
Details
Barrier complete with control unit - 230VacSB/61/2 05.61/2230 Vac Barrier complete with control unit and irreversible motor and mechanical slowing by rod-crank system. 2.5 mm sheet steel column treated against corrosion. Adjustable electro-mechanical limit switch. Internal balancing system with double spring. Large internal space for easy wiring. Release with double key in the case of a power cut. Circuit breaker protection incorporated. Reducer sealed in semi-fluid grease without any maintenance.
Details
6 m. Arm for SB/61/2 BarrierSB/A61 05.61 AAnodised aluminium arm complete with cylindrical reflector with the possibility of application of the M/66 sensitive edge -supplied separately-. Dimensions ط 60 mm. Length 6 m. Weight 7 Kg. The arm is supplied as 2 pieces measuring 3.5 m with telescopic insertion and fixing using strong steel rivets.
Details
Barrier complete with control unit - 230VacSB/60/2 05.60/2Barrier, suitable for intensive use complete with control unit and self-ventilated motor and mechanical slowing by rod-crank system. 3 mm sheet steel column treated against corrosion. Adjustable electro-mechanical limit switch. Internal balancing system with springs and hydraulic shock-absorbers. Large internal space for easy wiring. Release with double key in the case of a power cut. Circuit breaker protection incorporated. Reducer sealed in semi-fluid grease without any maintenance.
Details
6 m. Arm for SB/60/2 BarrierSB/A60 05.60 AAnodised aluminium arm complete with rectangular reflector studied for the application of the M/66 sensitive edge -supplied separately-. Dimensions 45x120 mm. Length 6 m. Weight 11.4 Kg. The arm is supplied as 2 pieces measuring 3 m with coupling and fixing using strong steel rivets.
Details
Barrier complete with control unit - 230VacSB/80/2 05.80/2230Vac Barrier, suitable for intensive use complete with control unit and self-ventilated motor and mechanical slowing by rodcrank system. Very strong self-ventilated motor in order to obtain a high torque. 3 mm sheet steel column treated against corrosion. Adjustable electro-mechanical limit switch. Internal balancing system with springs and hydraulic shockabsorbers. Large internal space for easy wiring. Release with double key in the case of a power cut. Circuit breaker protection incorporated. Reducer sealed in semi-fluid grease without any maintenance.
Details
6 m. Arm for SB/80/2 BarrierSB/A80 05.80 AAnodised aluminium arm complete with cylindrical reflector with the possibility of application of the M/66 sensitive edge -supplied separately-. Dimensions ط 80 mm. Length 8 m. Weight 11.5 Kg. The arm is supplied as 3 pieces measuring 3 m with telescopic insertion and fixing using strong steel rivets.
Details
Base platePM/05 05.05Base plate for barriers SB/2/24 and SB/4/24
Details
Steel Base platePM/01 05.01Steel base plate 5 mm thick for all our barriers.
Details
Fercing for armsSP/22 05.22Fencing for arm SB/A4 and SB/A45 SB/A60, SB/A80 supplied in pieces measuring 2 m
Details
SpringSP/24 05.24Spring for SB/4/24 to use with SP/22 fencing
Details
Fixed supportPM/97 14.97Steel fixed support. Height: 935mm; Weight: 4,5Kg.
Details
Mobile arm supportPM/93 14.93Mobile arm support to be fixed on the arm.
Details
Articulated armSB/A3 S 05.13 SArticulated arm for SB/45/2
Details
Articulated armSB/A4S 05.14SArticulated arm for SB/4/24
Details
Luminous stripLA/02 05.32Luminous strip for SB/A2 with intermittent lights controlled by the control unit
Details
Luminous stripLA/04 05.34Luminous strip for SB/A4 with intermittent lights controlled by the control unit
Details
Electronic control panel for sliding gatesCR/14 13.14Electronic control panel with mechanical limit switches. It can be used with sliding gates driven by 400V~ and 230V~ three-phase motors with mechanical clutch. Weight: 1,3Kg
Details
Microprocessor electronic control panel for three-phase 400 V~ motorsCR/35 24.35Microprocessor electronic control panel with mechanical clutch for three-phase + neutral 400V~ motors. Max. power of the motor: 1,5KW/2CV like our motor MT/5000/1. Dimensions: 315x395x310mm. Weight: 5Kg
Details
Control panel for swing gates 12/24VdcCR/39 24.39Microprocessor control panel for swing-gates operators 12/24Vdc, integrated inside receiver to drive transmitter type OG/52 - OG/82/1 - OG/54 and OG/84. electronic current control in case of impacts, programming of slow-down. Power supply: 12Vdc or 24Vdc. Absorption: 8A at 12V, 4A at 24V. Working temperature: -20 ÷ + 60°C Dimensions: 180x280x130mm. Weight 1,5Kg
Details
CR/41 29.41
Details
CR/37 9.2437
CR/50/24 9.2950/24
Multi-use electronic control panelCR/21 24.21Multi-use control panel for roller shutters, window roller shutters, awning automations, one-wing or sliding gates. For 230V~ motors with mechanical clutch. Weight: 0,8Kg
Details
MR/08 24.08
Details
RT/01 26.01
Details
RT/20A 26.20A
Details
2 channel rolling code remote controlOG/2M 25.2M
¦ PDF
4 channel rolling code remote controlOG/4M 25.4M
¦ PDF
Outdoor dual channel receiver - rolling codeOG/76R 25.76R
¦ PDF
Plug-in dual channel receiver - rolling codeSOG/4 R 25.04 R
¦ PDF
Memory expansion cardSOG/2 A 25.02 A
¦ PDF
AntennaSM/00 25.00
¦ PDF
Stylus antenna 433MHzOG/50 25.50Stylus antenna 433MHz complete with 4,5m of coaxial cable RG58. It has to be used when you prefer to keep the antenna apart from the flashing light in order to obtain the maximum range from the transmitters. For OG/76, SOG/4, SG/06, SG/40 transmitters.
Details
2 self learning code remote controlOG/62 25.62
¦ PDF
4 self learning code remote controlOG/64 25.64
¦ PDF
OG/28 25.28
Details
OG/48 25.48
Details
OG/60 25.60
Details
Outdoor dual channel receiverOG/76 A 25.76 A
¦ PDF
Plug-in dual channel receiverSOG/4 A 25.04 A
¦ PDF
Two-channel transmitter 433MHz with dip-switchesOG/02 25.22Two-channel transmitter programmable by means of dip-switches (1024 possible combinations) with a range of action over 100 m. 1 LED to signal the correct working of the device. Equipped with a marsupium shaped case OG/80. Dimensions: 70x36x18mm. Weight: 35g
Details
Card receiver for the transmitters OG/02 and OG/04SG/06 25.06Two-channel card receiver for the transmitters OG/02 and OG/04. To insert in the control panels CR/14-21-30-31-31C-34-35-37. Programmable by means of dip-switches. Code at 1024 combinations.
Details
Two-channel transmitter 310MHz - SPARE PARTSOG/32 13.32Quartz two-channel transmitter 310Mhz with different codes. 2 LEDs: one to signal the correct working of the device and one to signal when the battery starts to discharge. Equipped with a marsupium shaped case.
Details
One-two-channel card receiver 310MHz - SPARE PARTSSOG/3 13.78One-two-channel card receiver suitable for insertion into the control panels CR/30-31-31C-14-35.
Details
Stylus antenna 310MHz - SPARE PARTSOG/40 14.40Stylus antenna complete with 4,5m of coaxial cable RG58.
Details
Photocells for outdoor 24Vac-dcP/10 21.10Pair of infrared photocells for outdoor. Distance: 20 m. indoor, 10 m. outdoor. Dimensions: 70x40x90mm. Weight: 120g.
Details
Photocells for outdoor 12Vac-ccP/10/12 21.10/12Pair of infrared photocells for outdoor. Distance: 20 m. indoor, 10 meters outside. Dimensions: 70x40x90mm. Weight: 120gr.
Details
Photocells for outdoor 24 Vac-dcP/94 21.94Pair of infrared photocells for outdoor. Distance: 50 m. indoor, 25 m. outdoor. Dimensions: 58x104x44mm. Weight: 220g
Details
Photocells for outdoor 12V-P/92 21.92Pair of infrared photocells for outdoor. Distance: 50 m. indoor, 25 m. outdoor. Dimensions: 58x104x44mm. Weight: 220g
Details
Flushmounting photocells 24Vac-dcP/30 21.30Pair of infrared photocells for flushmounting. Distance: 20 m. indoor, 10 m. outdoor. Dimensions: 73x73x99mm ّ60mm. Weight: 270g
Details
P/99 21.99
Details
Column for photocells P/10 - P/10/12M/57 20.57Elegant and modern small column in varnished aluminium with metallic powders. Base and photocell support made in nylon. Dimensions: 7x4cm h:55cm, Weight 660g, Pack 2 pieces
Details
Column for key M/10M/59 20.59Elegant and modern small column in varnished aluminium with metallic powders. Base and photocell support made in nylon. Dimensions: 7x4cm h:105cm, Weight 1,1 Kg, Pack 2 pieces
Details
Small column for the photocells P/10-10/12-92-94M/37 20.37Small column in galvanized steel for the photocells P/10-10/12-92-94. Dimensions: 47x80x600mm. Base plate: 170x170mm. Weight: 2,5Kg.
Details
Double-housing small column for the photocells P/10-10/12-92-94 and the electric key M/10M/38 20.38Double-housing small column in galvanized steel for the photocells P/10-10/12-92-94 and for the electric key M/10. Dimensions: 47x80x1000mm. Base plate: 170x170mm. Weight: 4Kg.
Details
Support for the photocells P/10-10/12-92-94M/34 20.34Strong stainless steel support for the photocells P/10-10/12-92-94. It has two functions: it protects against crashes and is a support for the fixing of the photocells both on the side and on the bottom of small columns, pillars, etc. by means of screws or welding. Dimensions: 55x118x70mm. Weight: 200gr.
Details
M/26A 24.26A
Details
Pneumatic sensitive edge for armsM/66 24.66Pneumatic sensitive edge for arms. Length on request. Height: 30 mm.
Details
Guide to bring the signal by cableGC/46 24.46Device to bring the signal by cable from the sensitive edge to the control panel up to 5m
Details
Guide to bring the signal by cableGC/47 24.47Device to bring the signal by cable from the sensitive edge to the control panel up to 10m
Details
Mechanical sensitive edge of 1,8 mM/75 84.75Mechanical sensitive edge of 1,8 m for garage doors, barriers and sectional doors.
Details
Mechanical sensitive edge of 1,2 mM/76 84.76Mechanical sensitive edge of 1,2 m for garage doors, barriers and sectional doors.
Details
Joint in PVC for sensitive edge M/75 or M/76M/77 84.77Joint in PVC to connect two sensitive edges like M/75 or M/76.
Details
Right angular for sensitive edge M/75 or M/76M/78 D 84.78 DRight angular for M/75 or M/76 sensitive edge installation on garage doors.
Details
Left angular for sensitive edge M/75 or M/76M/78 S 84.78 SLeft angular for M/75 or M/76 sensitive edge installation on garage doors.
Details
Right cap for sensitive edge M/75 or M/76M/79 D 84.79 DCap for sensitive edges M/75 or M/76
Details
Left cap for sensitive edge M/75 or M/76M/79 S 84.79 SCap for sensitive edges M/75 or M/76
Details
M/86 24.86
Details
M/56 24.56
Details
M/56T 24.56T
Details
M/66T 24.66T
Details
M/04A 24.04A
Details
LP/01 27.01
Details
LP/10 27.10
Details
Electric keyM/10 24.10Electric key with automatic return with 2 positions: OPEN/CLOSE. Waterproof shock resistant housing made in ABS protected against vandalism. Dimensions: 70x40x90mm. Weight: 120g
Details
Electric key with the same codesM/10 C 24.10 CThank to this code you can order several selectors M/10 to allow the customer to use a single key with different selectors.
Details
Flushmounting electric keyM/22 24.22Electric key with automatic return with 2 positions: OPEN/CLOSE. Flushmounting waterproof housing. Dimensions: 73x73x90mm. Dimensions of the embedded part: ّ60x83mm. Weight: 270g
Details
Flushmounting electric key with the same codesM/22 C 24.22 CThank to this code you can order several key selectors M/22 to allow the customer to use a single key with different selectors.
Details
RZ/20 F 10.20 F
Details
RZ/21 F 10.21 F
Details
Orange flashing light 230V~ with built-in antennaRZ/07/1 F 10.07/1 FOrange flashing light 230V~ with built-in antenna and electronic incorporated.
Details
Orange flashing light 230V~RZ/01 F 10.01 FOrange flashing light 230V~, electronic incorporated, to signal moving gates or danger.
Details
Flashing light at 12÷24VdcRZ/24 F 10.24 FFlashing light at 12÷24Vdc with incorporated antenna without internal electronic for flashing.
Details
Orange flashing light 12V-RZ/02 F 10.02 FOrange flashing light 12V-, electronic incorporated, to signal moving gates or danger.
Details
BracketRZ/99 10.99Bracket for the installation of the flashing lights on the side of pillars, small columns, walls.
Details
Cable for flashing RZ/07/1F already layed upCS/07 12.07
Details
UT/40 63.40
Details
Electric lock for floor levelM/83/1 14.83/1Electric lock 12V- for floor level for wing gates. Dimensions: 100x155x50mm. Weight: 1,7Kg
Details
Double cylinder for the electric lock M/83/1M/82/1 24.82/1Double cylinder for the electric lock M/83/1 that allows the opening both from the inside and outside of the gate.
Details
Vehicles magnetic detectorRP/01 08.13Electronic device held in an 11 pin box, which detects the presence of vehicles, and operates gates, barriers and traffic lights. Adjustable threshold. Dimensions: 76x40x98mm. Weight: 200g
Details
Stop shoeM/00 14.00Steel stop shoe for wing gates.
Details
MT/12 E 14.02 E
Details
12V batteryBT/01 11.01Alkaline battery 12V 33mAh for transmitters.
Details
BT/05 11.05
Details
BT/10 11.10
Details
BT/14 11.14
Details
Battery 12V 2AhBT/20 11.20Italian battery 12V 2Ah-28A, rechargeable, dimensions: 178x34x60mm. Weight: 0,9Kg
Details
CO/01 78.01
Details
CO/02 78.02
Details
CO/03 78.03
Details
CO/04 78.04
Details
CO/05 78.05
Details
14.92/E
Details
14.92/24
Details
14.92/9
Details
80.06/1
Details
80.07/P
+ نوشته شده در ساعت توسط آرماسیستم
|
